Chinese|English
 
Technical support
  Battery structure
  Battery principle
  Battery features
  Commonly used terms
  UPS reference diagram
  Manual
  Matters needing attention
  Comparison of specific product indexes and industry standards
  Product flow

Contact us
Guangzhou Ouji Electronic Technology Co., Ltd
Address: Guangzhou City, Panyu District Qinghe Road No. 76 east Shi Gang
Tel:020-34628335
Fax:020-34628335
Code:510640
E-mail: 2397808949@qq.com
Url: http://www.ibmabb.com
Battery structure Current location: Home > Technical support > Battery structure  

[Plate] By special lead calcium silver alloy plate gate and the positive active material composition of the coating on them.

[Negative plate] By a series of lead calcium silver alloy plate gate and besmear is on the cathode active material composition.

[Partition] With high acid storage capacity of super fine glass fiber clapboard, the acid uptake enough to participate in the anode electrochemical reaction is the required amount of electrolyte.

[Electrolyte] Containing special additives of dilute sulphuric acid electrolyte, and all be adsorption in the diaphragm, no flow acid batteries.

[Relief] By acid made from rubber anti-aging, automatic discharge inside the battery too much gas, and keep the air pressure inside the battery in a safe range.

[ Shell and cover]By high strength, resistance to impact of ABS plastic.

[Post] Made of silver plated copper or lead alloy surface, and using the latest sealing structure and technology.


 
Copyright © Guangzhou Ouji Electronic Technology Co., Ltd All Rights Reserved.
Address: Guangzhou City, Panyu District Qinghe Road No. 76 east Shi Gang Tel:020-34628335 Fax:020-34628335 Code:510640
Url: http://www.ibmabb.com E-mail: 2397808949@qq.com
Yue ICP Bei 17025572